E & P Marine Made In USA Member of NMMA About Us Made In USA Member of NMMA About Us

About E & P Marine

Announcement, Feb 3, 2012: Miami International Boat Show, February 16-20

The Miami International Boat Show will once again allow us the opportunity to meet face to face and exchange ideas. E & P Marine will have personnel in place to assist you as the global representative for various US-based marine manufacturer's. 

Miami Int'l Boat Show Logo
Find us with Ritchie Navigation in booth:
M60 - CONVENTION CENTER
.

If you would like to prearrange a meeting, kindly reply to this email and we will contact you with a confirmation.

Until then, I look forward to attending the show and most of all, I look forward to meeting with you.

Sincerely,
Miguel Vasallo, VP Marketing & Sales
Lilly Diaz,
Vice President of Operations, E & P Marine
Email: Lilly@epmarine.com  
Tel: +01 (305) 634-6110

 

See Us in Booth M60 - CONVENTION CENTER | Ritchie Navigation

Ritchie Navigation, has been engineering, innovating and building marine compasses for over 150 years.

November 2011 - Save 25% on Jim Black & Assoc Escape Hatch

While quantities last, Jim Black and Associates is offering a 25% discount on 18" x 18" (457mm x 457mm) Escape Hatch. read more....

Upcoming Trade Shows - Opportunities to Meet Face to Face

METS LogoSee us at METS in Amsterdam
November 13-15, 2012

Ibex LogoSee us at Ibex in Louisville, Kentucky, USA 
October 2-4, 2012
 

 

SEPT 2011 - Become an Authorized Ritchie Service Station

As part of Ritchie's continued growth commitment to customer satisfaction and product support, the world's oldest compass manufacturer continues to expand its network of Authorized Repair Stations. read more....

 

MAY 2011 - Ritchie's Voyager and Navigator Compasses Meet the New Wheelmark Standard

Wheelmark LogoWheelmark approval is required for magnetic compasses on life boats, rescue boats and commercial vessels in Europe. read more... 

 

 

Perko in the News

Announcement, May 15, 2011 - United States Enforces New Emissions Standards for Gasoline Powered Vessels.

 

Perko Emission Control Systems 
Recommended CARB Canister System above (click image to see other typical designs)

New Emission standards from the United States Environmental Protection Agency (EPA) will take effect on July 31, 2011. This will affect gasoline powered vessels imported into the U.S.

Manufacturers will have to comply with new fuel system designs with integrated components (canisters, fills, vents and valves) such as those available from PerkoFuelSystems.com.

Included in the regulations is a transition program which allows manufacturers a phased-in period to produce exempted vessels.
 
In order to participate in this program you must send EPA written notification by July 31, 2011.

HAVE YOU SUBMITTED YOUR NOTICE TO THE EPA?
Download sample notification letter for your use.

Perko-Delphi Marine Canister & Specialized Fuel System Valves
Perko has been manufacturing fuel system components since 1936 and they now include carbon canisters and specialized fuel system valves design specifically to meet new EPA and CARB emissions regulations. Click one the images below to learn more about the necessary components:

Perko Specialized Fuel System Valves
Perko Specialized Fuel System Valves
Perko-Delpi Marine Canister
Perko-Delpi Marine Canister


Posted by,
Miguel VasalloMiguel Vasallo, Vice President of Marketing & Sales
E & P Marine
Email:
Miguel@epmarine.com    
Tel: +01 (305) 634-6110

Announcement: January 1st, 2011:
E & P Marine Expands Business Activities in Europe

Christoph Witt
Christoph Witt, Marine Sales Consultant

As part of the strategy to support our worldwide expansion, US-based marine manufacturer's representative E & P Marine has engaged the services of Christoph Witt, a marine sales consultant based in Germany, effective January 1st 2011. 

Christoph Witt is a proven leader with numerous years of sales and marketing experience in the recreational marine industry and has worked for reputable companies such as Aqua Signal and Torqeedo in the past.

E & P Marine is committed to continued worldwide expansion of its represented line of recreational marine products, particularly in the European market.

We extend our most sincere welcome to Christoph.

Regards,

Miguel Vasallo, VP E & P MarineMiguel Vasallo,
Vice President of Marketing and Sales, E & P Marine
Email: Miguel@epmarine.com  
Tel: +01 (305) 634-6110

 

News Release November 17th, 2010:
Perko and E & P Marine Present Top Distributor Award at METS

By IBI Magazine

US marine equipment manufacturer Perko and manufacturer's representative E&P Marine Inc awarded Brazilian distributor Regatta with Perko's first ever Top Distributor award at METS this week in Amsterdam.

The presentation took place on Tuesday at Perko's stand and celebrates 28 years of collaboration.

"We've been working with Regatta for almost 30 years," said Perko's vice president of marketing George Bellwoar. "This is the first time we've presented this award. We've never had good reason to before. It's very rare for us to do something like this."

Perko manufactures a wide range of marine equipment from deck hardware to navigation lights at its Miami facility.

"Some distributors struggle to carry a broad selection of Perko products, but Regatta carries a wide range. We're proud to have them as a distributor."

Regatta founder Paulo Veloso began the company with his business partner 28 years ago. The distributor has 10 retail stores - with plans for two more to open next year - and supplies both the boatbuilder and end user, even selling boats.

"We've really seen the Brazilian marine industry develop," said Veloso. "The boom in Brazil is not as profound as everyone says it is, but compared with the crash felt in other countries then Brazil is doing very well. After a dip in 2009 we're already back up to 2008 levels, which was a fantastic year."

Vice president of E&P Marine Miguel Vasallo has seen an increase in the number of American companies looking to export since the crisis.

"We used to only represent US manufacturers in the Caribbean and in South America, but two years ago our representation went worldwide," says Vasallo. "The Pacific Ring is doing well, Australia in particular, and the Middle East is still very interesting."

 

News Release October 26th, 2010:
Announcing Partnership Between HMG and E & P Marine

Hi-Tide Manufacturing Group, LLC expands international export business through its newly developed partnership with E & P Marine. E & P Marine, Inc. will be the exclusive representative for all business outside of North America for Hi-Tide Manufacturing Group, LLC.

Hi-Tide Manufacturing Group, LLC is a privately held company based out of Kissimmee, Florida with its members having over 40 years of engineering and manufacturing experience.

Hi-Tide Manufacturing Group, LLC manufactures the brands of Innovative Product Solutions and Jim Black & Associates.

E & P Marine, Inc. is a world-renowned marine sales representative group established in 1980, with over 30 years of hands on experience including marine and industrial engineers and staff.

Contact: Hi-Tide Manufacturing Group, LLC
P.O. Box 420640,
Kissimmee, FL 34742-0640
Tel: +01 (407) 933-2029
Fax: +01 (407) 846-3551
Email: info@gotohmg.com
Website: www.gotohmg.com

News Release posted by:
Miguel Vasallo, VP E & P MarineMiguel Vasallo,
Vice President of Marketing and Sales
E & P Marine
Email: Miguel@epmarine.com
Tel: +01 (305) 634-611001

 

News Release October 7th, 2010:
Veethree Instruments receives ISO 9001 – 2008 certification

Veethree Instruments is proud to announce that it has recently received ISO 9001 – 2008 certification. After acquiring the Teleflex line of instruments in March of 2009, Veethree has worked hard to obtain the ISO certification. It shows their commitment to the industry that they have systems in place to allow them to meet their quality policy and “to ensure customer satisfaction by providing a high quality product on time at a competitive cost through continual improvement”. The Veethree team appreciates their current customers and will work hard to win the trust of others. For more information on Veethree products you can contact sales@veethree.com or visit their website at www.v3instruments.com.
ISO 9001 Certification

Posted by: Eddy F. Hernandez, Process Development Director, E & P Marine

 

News Release June 1, 2010:
Hiring of Eddy Hernandez as new Process Development Director

After a full year of pursuing our worldwide expansion, E&P Marine is pleased to announce that Mr. Eddy Hernandez has joined our group as Process Development Director.

Mr. Hernandez, with his sound understanding, knowledge of our industry and his organizational skills is a great addition to our growing team. Previously with Bertram Yachts, Eddy was a Manufacturing Control Manager and has been involved in different stages of Supply Chain Management.

The addition of Eddy brings a key component to the development of our systems and the implementation of our strategic planning.

Eddy's Contact Information:
Eddy F Hernandez,
Process Development Director
Email: eddy@epmarine.com
Tel: (305) 634-6110

Posted by: Miguel Vasallo, Vice President, E & P Marine

July 2009

Veethree, Inc. appoints E & P Marine , Inc. as their manufacturer’s representative for Central & South America, the Caribbean and the Middle East.

 

 

E & P News and Events

 

E & P Marine Logo
Home | E & P News | Manufacturers | Products | About Us | Contact Us
©2012 E&P Marine, Inc. Website designed and mantained by International Advertising, Inc.
E & P Marine Logo
Home | E & P News | Manufacturers | Products | About Us | Contact Us
©2012 E&P Marine, Inc. Website designed and mantained by International Advertising, Inc.